Nominal Cell Constant (K) = 0.05,Extended Sensor Body with 316 Stainless Steel Outer Electrode, Requires 316 SS Ball Valve Assembly MH113M2C, Aluminum Junction Box with 3/4" NPT Conduit Connection - R

Nominal Cell Constant (K) = 0.05,Extended Sensor Body with 316 Stainless Steel Outer Electrode, Requires 316 SS Ball Valve Assembly MH113M2C, Aluminum Junction Box with 3/4" NPT Conduit Connection - Requires 1W1100 Interconnect Cable, Titanium Electrode

• High Performance Design
• Resistivity and Conductivity Measurement Capability
• Versatile Mounting Styles
• Full-Featured “Plug and Play” Hach sc Digital Controllers

• High Performance Design

  These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant (Hach’s easy DRY-CAL™ method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

  Resistivity and Conductivity Measurement Capability

  These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.

  Versatile Mounting Styles

  Compression fitting sensors—Feature titanium electrodes and a compression fitting for universal installation with up to 4 inches (102 mm) insertion depth. The 1/2-inch or 3/4-inch male NPT compression fittings are offered in Kynar® (PVDF) or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor from the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 7 inches (178 mm).

  Full-Featured “Plug and Play” Hach sc Digital Controllers

  There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

  What's in the box

  Includes: sensor with 20 ft cable and manual