Nominal Cell Constant (K) = 0.05, 1/2 inch NPT Kynar (PVDF) Compression Fitting, 7m (23 ft) Digital Cable, Titanium Electrode

High Performance Design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications, including ultra-pure water, clean-in-place （CIP）, and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant （Hach’s easy DRY-CAL™ method） when configuring the analyzer to ensure the highest possible measuring accuracy. Each sensor also has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and Conductivity Measurement Capability

These enhanced performance sensors measure from 0.057 µS/cm or 18.2 MΩ （theoretically pure water） up to 200,000 µS/cm.

Versatile Mounting Styles

Compression Fitting Sensors--
Feature titanium electrodes and a compression fitting for universal installation with up to 4 inches （102 mm） insertion depth. The 1/2-inch or 3/4-inch male NPT compression fitting are offered in Kynar® （PVDF） or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor form the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 7 inches （178 mm）.
Non-Metallic General Purpose Sensors--
Have graphite electrodes and 3/4-inch male NPT threaded Ryton® bodies. Mount into a standard 3/4-inch pipe tee, 1-1/2-inch Hach union hardware （for 10 Cell Constant sensor only）, or fasten onto the end of the pipe.
High Pressure and High Temperature Sensors--
Are designed for monitoring boiler water and condensate in return lines. They have 316 stainless steel electrodes and threaded bodies （3/4-inch male NPT）. They can be fastened into a boiler wall using a 3/4-inch weldolet or mounted into a process line using a standard 3/4-inch stainless pipe tee.
Sanitary Clean-in-Place （CIP） Style Sensors--
Have 316 stainless steel electrodes and an integral 1-1/2-inch or 2-inch flange. These sensors can be installed using standard sanitary mounting hardware.

What's in the box

Includes: sensor with cable and manual

Specifications

Accuracy:± 2 % of reading above 200 µS/cm

Cable Length:Standard Probe Cable Length （integral）Digital Probe: 7 m （23 ft.）

Length:Digital Probe: 0.3 in （ 7 ） m （23 ft.）

Operating Temperature Range:-20 to 200 °C

Pressure Limit:0 to 300 psi （20.7 BAR）

Repeatability:± 0.5 of reading

Response Time:90 % of reading within 30 seconds of step change

Temperature Compensation:Temperature Compensator: Pt 1000 RTD

Temperature Measurement:-20 to 200 °C （–4 to 392°F）

Transmission Distance:100 m